Quality and Certificates
CE declaration of conformity, Euromap 67/12 compatibility, FAT/SAT protocol and the ISO 9001 target (2027).
Conformity and targets
No document is listed as a claim; each is shown with its current status.
CE declaration of conformity (2006/42/EC)
Issued per robot serial number; safety circuit and risk analysis on file.
Euromap 67 and 12 compatibility
Standard interface; converter cable set available.
FAT / SAT protocol
8-hour uninterrupted FAT, 4-hour SAT; record and report.
ISO 9001 certification — target 2027
Quality management system implementation is under way; certification planned for 2027.
Food-contact compliant components
Conveyor belts and suction cups in FDA-compliant materials.
What we measure in the factory acceptance test
| Parameter | Criterion | Method |
|---|---|---|
| Cycle time | Within ±2% of target | 8 hours of continuous production, HMI log |
| Label position error | ≤ ±0.3 mm | Measured by vision inspection |
| Scrap rate | Below 0.5% | Count over a 1,000-part run |
| Repeatability | ±0.05 mm | 50 repetitions with a dial gauge |
| Safety functions | All functional | Door interlock, emergency stop and light curtain test |
| Euromap 67 signals | All verified | Signal list checked with a simulator |
Ask for the FAT protocol and a sample report.
See the criteria a cell must meet before shipment; we share the protocol with the quotation.