Skip to content
Plast Eurasia Istanbul 2026 · 2–5 December · TÜYAPTime left: 54 d 19 hGet an invitation
SE-650· SE Side-entry IML robots

SE-650 Side-Entry IML Robot

For pails and large containers: 2–16 cavities on 450–700 t machines, 30 kg payload, handle assembly integration.

FeaturedLead time: 10–12 weeks
  • 3.0sDry cycle
  • 1.1sIntervention
  • 2–16Cavities
  • 450–700tIMM tonnage
Request a QuoteDatasheet (PDF)
SE-650 Side-Entry IML Robot

Overview

The SE-650 is a heavy-duty side-entry IML robot designed for paint and food pail producers. On 450–700 t machines it covers a wide range from a 2-cavity 20 litre pail to a 16-cavity 1 litre container. Its 30 kg payload carries handled-pail grippers and large wrap-around label cores together.

Integrated with the HA-Handle unit, the handle is fitted in-line as soon as the pail leaves the mould; no operator is required. A 900 mm vertical stroke and a two-stage vacuum circuit for tall labels are standard.

Conveyor, stacking, boxing and palletising interfaces are configured per project.

Key Features

  • Reinforced servo main axis, 1.1 s interventionThe horizontal main axis enters the mould gap from the side; in a single entry it takes out the parts and places new labels in the cavities.
  • Double-sided EOAT plateLabel cores on one face, part grippers on the other: take-out and placement in a single entry.
  • Cassette servo label magazineA separate cassette per cavity; quick change, level sensor and double-label check.
  • Simco-Ion electrostatic chargingThe label holds to the cavity wall by static charge; no shifting or folding, vacuum is used only during transfer.
  • KEBA KeMotion control, 15" HMIOpen-architecture controller; recipe memory, step-by-step teaching and Euromap 67 synchronisation with the IMM.
  • Remote access and OPC UAHMI screen sharing and log analysis over VPN; OPC UA data points for MES/ERP.
  • Vacuum monitoringA vacuum sensor per cavity; a missing label or part is detected immediately and the cycle stops safely.
  • Handle assembly integration (option)The HA-Handle unit runs in sync with the robot; handle fitting completes in-line in 4 seconds.
  • CE and integrated safetySafety PLC, door interlocks and the Euromap 67 safety circuit in one cabinet; delivered with a CE declaration.
  • Integrated stacking and countingThe outfeed conveyor carries parts mouth-down, counts them and stacks to the packing quantity.

Gallery

SE-650 Side-Entry IML Robot 101 / 03

Technical drawing

Technical Specifications

Datasheet (PDF)
General
Suitable IMM clamping force450–700t
Number of cavities2–16pcs
Dry cycle time3.0s
Mould intervention time1.1s
Payload30kg
Label facesWrap-around (full circumference) + lid
Entry directionSide (opposite operator)
MountingFloor, beside machine
Axes
X-axis stroke (entry)2,000mm
Y-axis stroke (vertical)900mm
Z-axis stroke (horizontal)600mm
Axis driveServo (KEBA KeDrive), double rack
Repeatability±0.08mm
Maximum speed4.5m/s
View all (39)
Labelling
Magazine stationsOne per cavity (2–16)
Magazine capacity400labels/station
Label pick-upVacuum + mechanical support
Label charging (static)Simco-Ion Chargemaster (2 channels)
Label formatsWrap-around, pail, large lid
Label checkVacuum sensor, double-label detection
Control and HMI
Control systemKEBA KeMotion
HMI15" touch
IMM interfaceEuromap 67
Remote accessVPN + OPC UA
Recipe memory500pcs
SafetySafety PLC, door interlocks, Euromap 67 safety circuit
Power and pneumatics
Connected load12kW
Supply380 V / 50 Hz
Air pressure6bar
Air consumption45Nl/cycle
VacuumBecker pump, two-stage
Dimensions and weight
Dimensions (L×W×H)4,600×2,300×2,800mm
Weight2,800kg
Footprint10.6m²
ColourRAL 7016 / RAL 7035 / RAL 1003
Conformity and delivery
CE conformityYes
Lead time10–12weeks
Warranty24months
Downstream equipmentConveyor, handle assembly (option), stacking

Options

  • VQ-Vision label inspectionOPT-VQ

    Dual-camera label presence, position and print check; automatic reject.

    Optional
  • Double stacking stationOPT-2ST

    Two independent stacking lanes; no stop during packing change.

    Optional
  • LM-8 eight-station magazineOPT-LM8

    8 cassettes for high-cavity moulds, 800 labels per station.

    Optional
  • Wrist rotation 90°/180°OPT-360

    Servo wrist for five-face labelling and lid applications.

    Optional
  • Handle assembly integrationOPT-HA

    Pail handles are fitted in-line with the HA-Handle unit.

    Optional
  • Boxing / palletising interfaceOPT-BOX

    Euromap 17 data exchange with a case packer or palletiser.

    Optional
  • Quick mould change kitOPT-QC

    Second EOAT plate + magazine cassette set + recipe; changeover in 30 minutes.

    Optional
  • Vacuum monitoring and static generatorOPT-STD

    Included in standard scope.

    Standard

Standard Scope of Supply

  • Robot frame and servo axes

    X/Y/Z servo, energy chain, guarding

    Included
  • Product-specific EOAT plate (1 pc)

    Label cores + vacuum grippers

    Included
  • Label magazine (one cassette per cavity)
    Included
  • Simco-Ion electrostatic charging unit
    Included
  • KEBA control cabinet and 15" HMI
    Included
  • Outfeed conveyor and stacking

    PU belt, counter, 1 stacking lane

    Included
  • Euromap 67 cable set and commissioning

    3 days installation + 2 days training

    Included
  • VQ-Vision camera inspection

    Option OPT-VQ

    Not included
  • Boxing / palletising

    Project based

    Not included

Compatible Injection Moulding Machines

Suitable tonnage: 450–700 t

  • HaitianHaitian80–700 t
  • YizumiYizumi90–700 t
  • KraussMaffeiKraussMaffei80–700 t
  • EngelEngel80–700 t
  • ArburgArburg80–650 t
  • NetstalNetstal150–700 t
  • Sumitomo (SHI) DemagSumitomo (SHI) Demag80–700 t
  • BorcheBorche90–700 t

Brands are listed for compatibility information only and do not imply a partnership.

Applications

All applications

Case Studies

All references

Frequently asked questions

It works with any machine that has a Euromap 67 interface. Tonnage range and mould daylight are checked at quotation stage; we offer a converter for Euromap 12.

Under 30 minutes if the quick-connect EOAT and cassette set are ready. The recipe is recalled from the HMI; axis positions load automatically.

Standard lead time is 10–12 weeks. Factory acceptance (FAT) is run with your own mould and labels at our test centre in İkitelli; on site, 3 days installation and 2 days training.

PP, PE and PET based labels of 50–80 µm; charging parameters for metallic and embossed labels are stored in the recipe.

Related Models

All products

Request a quote for this model

Briefly describe your application; we will get back within 48 hours with a preliminary quote and application analysis.

  • Manufactured in İkitelli OSB
  • Preliminary quote within 48 hours
  • Free application analysis

Your product expert

Selin Arslan

Sales Manager

Product
Production
Contact