Skip to content
Plast Eurasia Istanbul 2026 · 2–5 December · TÜYAPTime left: 54 d 19 hGet an invitation
TO-Side· TO Take-out robots

TO-Side Side-Entry Take-Out Robot

Take-out and stacking only, for unlabelled lids and cups: 0.7 s intervention, cycle under 2 seconds.

Lead time: 6–8 weeks
  • 1.9sDry cycle
  • 0.7sIntervention
  • 2–16Cavities
  • 100–500tIMM tonnage
Request a Quote
TO-Side Side-Entry Take-Out Robot

Overview

On lid and cup moulds the time spent inside the mould sets the cycle time. Because the TO-Side only takes out, it uses a single-sided light plate; it enters and leaves the mould in 0.7 seconds and runs up to 16 cavities at cycles under 2 seconds.

The frame is shared with the SE series: when IML is adopted later, the magazine bay, static charging and a double-sided plate are added to upgrade to SE-250 or SE-450 level. DS-Stack stacking at the outfeed is standard.

Key Features

  • 0.7 s interventionThe horizontal main axis enters the mould gap from the side and takes out the parts in a single entry; with no label placement the plate is light and the motion short.
  • Single-sided light plateNo label cores; lower mass, faster motion.
  • Upgradeable to SESame frame; magazine and static charging can be added later.
  • KEBA KeMotion control, 10.1" HMIOpen-architecture controller; recipe memory, step-by-step teaching and Euromap 67 synchronisation with the IMM.
  • Vacuum monitoringA vacuum sensor per cavity; a part that is not picked up is detected immediately and the cycle stops safely.
  • Integrated stacking and countingThe outfeed conveyor carries parts mouth-down, counts them and stacks to the packing quantity.
  • CE and integrated safetySafety PLC, door interlocks and the Euromap 67 safety circuit in one cabinet; delivered with a CE declaration.

Gallery

TO-Side Side-Entry Take-Out Robot 101 / 03

Technical drawing

Technical Specifications

General
Suitable IMM clamping force100–500t
Number of cavities2–16pcs
Dry cycle time1.9s
Mould intervention time0.7s
Payload10kg
Entry directionSide (opposite operator)
MountingFloor, beside machine
Axes
X-axis stroke (entry)1,400mm
Y-axis stroke (vertical)600mm
Z-axis stroke (horizontal)400mm
Axis driveServo (KEBA KeDrive), rack and linear guide
Repeatability±0.05mm
Maximum speed5.5m/s
View all (32)
Control and HMI
Control systemKEBA KeMotion
HMI10.1" touch
IMM interfaceEuromap 67
Remote accessVPN (option)
Recipe memory200pcs
SafetySafety PLC, door interlocks, Euromap 67 safety circuit
Power and pneumatics
Connected load6kW
Supply380 V / 50 Hz
Air pressure6bar
Air consumption22Nl/cycle
VacuumBecker pump, monitoring per cavity
Dimensions and weight
Dimensions (L×W×H)3,000×1,700×2,300mm
Weight1,250kg
Footprint5.1m²
ColourRAL 7016 / RAL 7035 / RAL 1003
Conformity and delivery
CE conformityYes
Lead time6–8weeks
Warranty24months
Downstream equipmentConveyor + DS-Stack stacking

Options

  • Double stacking stationOPT-2ST

    Two independent stacking lanes; no stop during packing change.

    Optional
  • Boxing / palletising interfaceOPT-BOX

    Euromap 17 data exchange with a case packer or palletiser.

    Optional
  • IML upgrade kitOPT-IML

    Upgrade to SE level with magazine bay, ES-Charge and double-sided VG-EOAT.

    Optional

Standard Scope of Supply

  • Robot frame and servo axes

    X/Y/Z servo, energy chain, guarding

    Included
  • Product-specific take-out plate (1 pc)

    Single-sided, vacuum grippers

    Included
  • KEBA control cabinet and 10.1" HMI
    Included
  • Outfeed conveyor and stacking

    PU belt, counter, 1 stacking lane

    Included
  • Euromap 67 cable set and commissioning

    3 days installation + 2 days training

    Included

Compatible Injection Moulding Machines

Suitable tonnage: 100–500 t

  • HaitianHaitian80–700 t
  • YizumiYizumi90–700 t
  • KraussMaffeiKraussMaffei80–700 t
  • EngelEngel80–700 t
  • ArburgArburg80–650 t
  • NetstalNetstal150–700 t
  • Sumitomo (SHI) DemagSumitomo (SHI) Demag80–700 t
  • BorcheBorche90–700 t

Brands are listed for compatibility information only and do not imply a partnership.

Applications

All applications

Frequently asked questions

It works with any machine that has a Euromap 67 interface. Tonnage range and mould daylight are checked at quotation stage; we offer a converter for Euromap 12.

Under 30 minutes if a second take-out plate is ready. The recipe is recalled from the HMI; axis positions load automatically.

Standard lead time is 6–8 weeks. Factory acceptance (FAT) is run with your own mould and labels at our test centre in İkitelli; on site, 3 days installation and 2 days training.

Yes. The frame is shared with the SE series; with the OPT-IML upgrade kit, a magazine bay, ES-Charge and a double-sided VG-EOAT are added to reach SE level.

Related Models

All products

Request a quote for this model

Briefly describe your application; we will get back within 48 hours with a preliminary quote and application analysis.

  • Manufactured in İkitelli OSB
  • Preliminary quote within 48 hours
  • Free application analysis

Your product expert

Selin Arslan

Sales Manager

Product
Production
Contact